Transitional markov chain monte carlo method for bayesian model updating
Apparent porosity averaged 13% with 0% saw dust and 17% with 40% addition of saw dust bringing them closer to the acceptable range of 20-80%. When comparing the responses, the PID controller provides better performance compared with LQR.
Solid density averaged 3.18g/cm3 with 0% saw dust and 2.91g/cm 3 with 40% saw dust, still bringing them closer to the international range of 2.3-3.5g/cm3 . The simulation is done on various values for percentage of volume fraction recrystallization using both the controllers by MATLAB simulink toolbox.  James C ,"Optimization of microstructure development during hot working using control theory,"Metullurgical and Materials Transactions A, Vol 28 A, pp.1921-1930, Sep 1997.
Atomic Absorption Spectrometer(AAS) was used to determine the chemical composition, while other established processes were used to determine other insulating properties like particle size distribution, specific gravity, bulk density, solid density, water absorption, apparent porosity, permeability to air, refractoriness, thermal shock resistance, modulus of rupture, linear shrinkage and thermal conductivity.
The chemical analysis showed that all the samples had high percentages of silica and alumina, thereby classifying them as Alumino-silicates.
Several topics are categorized provides useful guidelines regarding background and operating principles of ejector including mathematical modelling, numerical simulation of ejector system, geometric optimizations. Ejectors: Applications in Refrigeration Technology. Renewable and Sustainable Energy Reviews 2004; 9–55.
This approach is applied to obtain the desired percentage of volume fraction recrystallization of '1' from an initial value of '0'. Antibacterial assay of synthesized Ag NP was carried out in solid (Nutrient Agar) growth medium against J., Interaction of silver nanoparticles with biological surfaces of Caenorhabditis elegans.
'Investigation and Improvement of Ejector Refrigeration System Using Computational Fluid Dynamics Technique' Energy Conversion and Management 2007; 56–64. Experimental investigation of a novel steam ejector refrigerator suitable for solar energy applications. In this Paper, a new approach for controlling microstructure development during hot working process by percentage of volume fraction recrystallization is proposed. One of the approaches is based on the Optimal Control theory and involves the developing of state space models to describe the material behavior and the mechanics of the process. The elemental composition of synthesized sample was confirmed by EDS analysis.
IJERA MENU CALL FOR PAPER PAPER SUBMISSION WHY CHOOSE IJERA AUTHOR INSTRUCTIONS STATISTICS UNIVERSITY AFFILIATES CHECK PAPER STATUS FAQ IJERA CONTENTS CURRENT ISSUE IJERA ARCHIVE SPECIAL ISSUE CALL FOR CONFERENCE UPCOMING CONFERENCE SPECIAL ISSUE ARCHIVE DOWNLOADS MODEL PAPER COPY RIGHT FORM COPYRIGHT INFRINGEMENT JOURNAL ETHICS OPEN ACCESS OPEN ACCESS Abstract: Clay deposits in the Federal Capital Territory of Abuja were investigated with a view to categorizing them in order to determine their suitability as insulating refractory material.
The samples were collected from three different locations in the territory, namely Sheda, Abaji and Karimu, and labeled A, B, and C.